Our name in Skype: Alva.Shrinkable

PE10523COA - medium-wall heat-shrinkable tubing with adhesive layer

Not retarding combustion medium wall heat-shrinkable tubing PE10523COA is classified as universal semirigid heat-shrinkable tubing with adhesive layer. These inexpensive tubes have excellent features, high, and most importantly - stable quality and best price.

Adhesive layer, applied to the inner surface of the tube, protects target objects from the adverse effects of the environment, creating sealing joints and voids.

Resistant to external influences material of heat-shrinkable tubing PE10523COA is ideal as a reliable mechanical protection of various products: gas and water tubes, electric cables, antennas, electric and gas service.

High electrical characteristics of the tubes can be recommended for safe electrical isolation of any electrical conductors at a voltage of 15 kV. The tubes can also be used as a protective outer shell and insulation installation terminal and connecting cable boxes.

The absence of halogen flame-retardants in the composition of the products is beneficial to the environment; ensure the safety of personnel working with heat-shrinkable tubing and a positive effect on the price of the product.

Key Features:

  • Operating temperature: -55 °C to +105 °C
  • Heat-shrinkable tubing Ratio:> 3:1
  • Heat-shrinkable tubing temperature: + 125 °C
  • High resistance to mechanical wear
  • Halogen free
  • Base color: black, red 1, a transparent 1
  • Supplied sliced by 1.22 meters

Analogues from other manufacturers:

MWTM, ATUM (Raychem / Tyco); IMCSN, MDT-A (3M); CFM, CCM (DSG-Canusa); LG-PMWT (LG); MSBRS (WOER); TUT-K TTEk, TTC (Russia); CFM Raychman, TCT GW2 (other manufacturers)

Specifications:

PropertiesMethod of TestingResult
Tensile strength ASTM D2671 12 MPa
Elongation at break ASTM D2671 400%
The density of the material ASTM D792 1.15 g / cm 3
Elongation at break after heating (164 hours at +150 °C) ASTM D2671 350%
Tensile strength after heating ASTM D2671 February 1 MPa
Flexibility at low temperatures (4 hours at -55 °C) ASTM D2671 Will not crack
Shore Hardness (Method D) ASTM D2240 55 - 60 D
Heat shock (4 hours at +150 °C) ASTM D2671 Does not flow, it does not crack
The melting point of the adhesive ASTM E28 + 85 °C
Bond strength to polyethylene ASTM D1000 110N / 25mm
Bond strength to aluminum ASTM D1000 80N/25 mm
Dielectric Strength ASTM D2671 20 kV /
Volume resistivity ASTM D257 October 14 Ohm·cm
Copper Corrosion ASTM D2671 Does not corrode
Water absorption ASTM D570 0.5%
Resistance to mold and mildew ASTM G21 Fungus and mold do not grow

1 - Supply of tubes of red and transparent colors is available on order only

Standard size range 1:


Sizes Order
Inner diameter in mmThe minimum wall thickness after full heat-shrinkable tubing mmThe standard length of the segment 2, mShape of the section of tube 3
Before heat-shrinkable tubing, minAfter, max
Ø 10/3 10 3 1.7 1.22 round
Ø 12/4 12 4 2.0 1.22 round
Ø 16/5 16 5 2.2 1.22 round
Ø 19/6 19 6 2.5 1.22 round
Ø 22/6 22 6 2.5 1.22 round
Ø 25/8 25 8 2.5 1.22 round
Ø 28/8 28 8 2.5 1.22 round
Ø 33/8 33 8 2.5 1.22 round
Ø 35/12 35 12 2.5 1.22 round
Ø 40/12 40 12 2.5 1.22 round
Ø 45/13 45 13 2.5 1.22 round
Ø 55/16 55 16 2.7 1.22 round
Ø 69/19 69 19 2.8 1.22 round
Ø 75/22 75 22 3.0 1.22 round
Ø 85/25 85 25 3.0 1.22 round
Ø 95/25 95 25 3.0 1.22 round
Ø 115/34 115 34 3.0 1.22 round
Ø 130/36 130 36 3.0 1.22 round
Ø 140/42 140 42 3.0 1.22 round
Ø 150/42 150 42 3.0 1.22 round
Ø 160/50 160 50 3.0 1.22 round
Ø 175/58 175 58 3.0 1.22 round
Ø 200/65 200 65 3.0 1.22 round
Ø 230/75 230 75 3.0 1.22 round
Ø 260/85 260 85 3.0 1.22 round

1 - Some sizes of PE10523COA tubes may not be in stock and produced / supplied on order

2 - The tube could be cut by other dimensional segments on order

3 - Some of tubes production batches can be supplied in the form of an oval